The 5 to 8 satellites distribution system is designed for the distribution of satellite signals from up to 8 satellite positions for up to 8 subscribes. Number of users is limited by number of outputs of used LNBs. Components for terrestrial signals reception can be easily added. No power supply is required (only for terrestrial amplifier, if required). This technology fills gap between multiswitches and DiSEqC switches.
Features of the components
stackable DiSEqC switch 8in/1out as basic unit
NEW: configurable operation mode DiSEqC 1.1 / 1.2
optional plug-in modules for insertion of terrestrial signals
S8/1PCN-3 (P.168)
Basic module, 8in/1out switch designed for direct connection of up to 8 SAT IF inputs to one receiver. Inputs are selected by DiSEqC 1.1 command "uncommitted switch" or by DiSEqC 1.2 command "Goto nn". The switch is mechanically designed in such a way that a number of them can be stacked together. Appropriate LNB types must be used: Twin, Quad or Octo according to number of stacked modules.
Specifications of S8/1PCN-3 (P.168)
Frequency range
LNB inputs
950-2300 MHz
Output
950-2300 MHz
Control
DiSEqC 1.0, 1.1, 1.2 commands
Insertion loss
5 dB avg
Sat. inputs isolation
25 dB min
Power consumption
From receiver
50 mA (18 V) + LNB
LNB current
400 mA max
Dimensions (w,d,h)
13.6 x 10.4 x 3.3 cm
Temperature range
-30 ~ +70 °C
Ingen kommentarer for øyeblikket.
Bare registrerte brukere kan legge til en kommentar.